Ribbed Steel Bar Welded Mesh

bar Reinforcing steel

我: 制造商 寻找: 產品公司

This reinforcement welded wire mesh panels are made of ribbed steel bars bonded via spot welding for slab and wall constructions. The ribbed steel rod used can improve bonding to the concrete and minimize any concrete cracking that may occur as a result of concrete shrinkage. This feature enables the ribbed steel weld mesh widely used as building materials for block slab structure reinforcing, and hollowed slabs reinforcement, building wall reinforcement and support wall reinforcement. In practical uses, it is commonly used with bar chairs as supports.

Materials and Types: Ribbed steel bar mesh can be divided into three types according to materials: Hot dipped galvanized, electro galvanized or stainless steel. It can be divided into two types according to steel bar sizes used: heavy type (diameter of bar or rod 12mm minimum) and light type (diameter of rebar rods from 3mm up to 10mm). Ribbed steel welded mesh can be divided into square hole and rectangular hole according to the opening types.

The popular panel size of this reinforcing mesh is 6m length ×2.4m width. It comes in a variety of bar thickness and the internal square or rectangular sizes. Common square mesh are either 200×200mm or 100×100mm.

Specification Details with Item No, Panel/sheet Size and Weight:

Ribbed Bar Welded Square Mesh Panels: Weight calculated based on defaulted panel size of 2400mmx6000mm.